predefined value of selected
compression level.
TX ALC Input
Gain (MENU_ALC_POSTFILT_GAIN)
If Audio Compressor Config is
set to CUSTOM, sets the value of
the ALC Input Gain. Otherwise
shows predefined value of
selected compression level.
RX NB
Setting (MENU_NOISE_BLANKER_SETTING)
Set the Noise Blanker strength.
Higher values mean more
aggressive blanking. Also,
changeable using Encoder 2 if
Noise Blanker is active.
DSP NR Strength (
MENU_DSP_NR_STRENGTH)
Set the Noise Reduction
Strength. Higher values mean
more aggressive noise reduction
but also higher CPU load. Use
with extreme care. Also,
changeable using Encoder 2 if
DSP is active.
TCXO Off/On/Stop ( MENU_TCXO_MODE)
The software TCXO can be
turned ON (set frequency is
adjusted so that generated
frequency matches the wanted
frequency); OFF (no correction or
measurement done); or STOP (no
correction but measurement).
TCXO Temp. (C/F) ( MENU_TCXO_C_F)
Show the measure TCXO
temperature in Celsius or
Fahrenheit.
To Next Page
Loading...