Recent RS-918SSB - Page 28

LABEL (NR)
DESCRIPTION
frequency is out
of the official
ham bands. DO
NOT USE WITH
CONNECTED
ANTENNA! Use
a dummy load!
Transmit Disable (CONFIG_TX_DISABLE)
Disable all
transmissions
unconditionally.
In CW you will
be able to hear
a side tone but
no transmission
is made.
Menu SW on TX
disable (CONFIG_AUDIO_MAIN_SCREEN_MENU_SWITCH)
Control if the
screen
automatically
adapts Encoder
value focus
when switching
between RX and
TX.
TX Mute Lineout (CONFIG_MUTE_LINE_OUT_TX)
During
transmission
with frequency
translation off,
line out will
carry one of the
two signal
channels. Good
for CW but not
very useful