Recent RS-918SSB - Page 29

LABEL (NR)
DESCRIPTION
otherwise. You
may switch this
signal off here.
TX Initial Muting Time (CONFIG_TXRX_SWITCH_AUDIO_MUTE)
When switching
from RX to TX
the audio and
HF output will
be muted for
roughly VALUE
ms. There are
now several
minimum times
for muting
defined in the
firmware:
Input from Mic:
40ms
Input from Line
In: 40ms
Digital Inputs
(CW, USB): less
than 1ms.
If the user
defined 'TX
Initial Muting
Time' is set to
more than zero,
the maximum of
both fixed input
time and user
defined time is
used. Your
microphone PTT
switch is a