Recent RS-918SSB - Page 30

LABEL (NR)
DESCRIPTION
potential source
of noise if Mic is
input! You need
to increase the
delay or change
switches!
Max Volume (CONFIG_MAX_VOLUME)
Set maximum
speaker
headphone
volume.
Lineout Gain (CONFIG_LINEOUT_GAIN)
Set the constant
gain level for
the analog
lineout jack
Key Beep (CONFIG_BEEP_ENABLE)
If ON each
keypress will
generate a short
beep
Beep Frequency (CONFIG_BEEP_FREQ)
Set beep
frequency in Hz.
Beep Volume (CONFIG_BEEP_VOLUME)
Set beep
volume.
CAT Running In Sandbox (CONFIG_CAT_IN_SANDBOX)
If On, frequency
Changes made
via CAT will not
automatically
switch bands
and affect the
manually