Recent RS-918SSB - Page 31

LABEL (NR)
DESCRIPTION
selected
frequencies.
CAT-DIQ-FREQ-XLAT (CONFIG_CAT_XLAT)
Select which
frequency is
reported via
CAT Interface to
the connected
PC in Digital IQ
Mode. If ON, it
reports the
displayed
frequency. If
OFF, it reports
the center
frequency,
which is more
useful with SDR
programs.
PTT via virtual RTS (CONFIG_CAT_PTT_RTS)
The virtual serial
port signal RTS
can be used to
switch to TX.
Use with care,
many CAT-able
programs also
set RTS to aktiv
and make the
TRX go to TX
mode.
XVTR Offs/Mult (CONFIG_XVTR_OFFSET_MULT)
When
connecting to a
transverter, set
this to 1 and set