Recent RS-918SSB - Page 35

LABEL (NR)
DESCRIPTION
voltage warning
colors and auto
shutdown.
Freq. Calibrate (CONFIG_FREQUENCY_CALIBRATE)
Adjust the
frequency
correction of
the local
oscillator.
Measure TX
frequency and
adjust until both
match. Or use
receive a known
reference signal
and zero-beat it
and then adjust.
More
information in
the Wiki.
Pwr. Display mW (CONFIG_FWD_REV_PWR_DISP)
Shows the
forward and
reverse power
values in mW,
can be used to
calibrate the
SWR meter.
Pwr. Det. Null (CONFIG_RF_FWD_PWR_NULL)
Set the forward
and reverse
power sensors
ADC zero power
offset. This
setting is
enabled ONLY