Recent RS-918SSB - Page 37

LABEL (NR)
DESCRIPTION
I2C2 Bus Speed (CONFIG_I2C2_SPEED)
Sets speed of
the I2C2 bus
(Audio Codec
and I2C
EEPROM).
Higher speeds
provide quicker
RX/TX
switching,
configuration
save and power
off. Speeds
above 200 kHz
are not
recommended
for unmodified
mcHF. Many
modified mcHF
seem to run
with 300kHz
without
problems.
RX IQ Auto Correction (CONFIG_IQ_AUTO_CORRECTION)
Receive IQ
phase and
amplitude
imbalance can
be automatically
adjusted by the
mcHF. Switch
ON/OFF here. If
OFF, it takes the
following menu
values for
compensating
the imbalance.
The automatic