Record Power SC3 - To check that the scroll gear has registered correctly with the jaw slides...

29
9. Maintenance
Fig 9.15
To check that the scroll gear has registered correctly
with the jaw slides, move the scroll gear by hand whilst
applying downwards pressure to it to observe the
movement of the jaw slides. If additional pressure is
required to move the jaw slides, hold the scroll gear in
position by hand and turn it using the chuck key, Fig
9.15.
Once the scroll gear is positioned correctly, check that
the jaw slides are still positioned symmetrically then refit
the circlip.
SC3 & SC4 Manual 3.7.indd 29SC3 & SC4 Manual 3.7.indd 29 22/04/2022 13:06:1522/04/2022 13:06:15