-006454590 7/
Unexpected OPENING / CLOSING / ROTATION
• Bruises and contusions from the door wings/apron
No persons or objects are allowed in the opening area of the door.
No safety devices (sensors) should be removed or disabled.
Do not rush through a door that is already closing.
Danger to life from electric current!
• Contact with live parts may result in immediate danger to life due to electric
shock. Damage to or removal of the insulation or individual components can
be life-threatening.
Before starting work on active parts of electrical systems and equipment,
make sure that they are de-energized and secured for the duration of the
work.
Keep moisture away from live parts. This can lead to a short circuit.
Never bridge fuses or put them out of operation.
Do not connect the power supply until all work has been completed.
Work on the electrical system must only be carried out by qualified personnel.
Intervention rules on sites
Subject to general labor laws:
Before starting with inspection and maintenance, it is necessary to ensure
that a side entrance can be used by third parties. It is highly recommended
to have a pedestrian barrier around the complete door!
All repairs and service work must be performed by qualified personnel.
Technicians must have good general technical knowledge and a good
knowledge of the current standards and regulations.
Before starting work on the door, ensure that all equipment and tools are in
good working order and conform to current safety standards.
The safety of all persons must be ensured!
Do not change the components of the automation system in any way.
Labeling and information must be visible to everyone.
To Next Page
Loading...
