-006454590 8/
Ensure regularly that all safety systems are in good working order.
State of technology
This system was developed using state of the art technology and officially recognized technical safety
regulations. The system, depending on its options and diameter, comply with the requirements of the
Machine Guidelines 2006/42/EG as well as EN 16005 and DIN 18650 (D).
Nevertheless, danger may arise if not used as intended.
Installation, commissioning, inspection, maintenance and repair work may
only be conducted by qualified, trained and authorized technicians.
After commissioning or repair work, fill in the check list and give it to the
customer for safe keeping.
We recommend obtaining a service agreement.
Personal protective equipment
Personal protective equipment is used to protect persons from adverse effects on safety and health.
Personnel must wear personal protective equipment during the various work activities on and with the
system.
Personal protective equipment is explained below:
Hearing protection is used to protect the hearing from noise. As a rule of
thumb,
hearing protection is compulsory from when normal conversation
with other people is no longer possible.
The head protection serves to protect against falling and flying parts and
materials. It also protects the head from bumping into hard objects.
Protective goggles protect the eyes from flying parts, dust, splinters or
splashes.
Protective gloves are designed to protect hands from friction, abrasions,
punctures or serious injury and from burning caused by contacting hot
surfaces.
To Next Page
Loading...
