EasyManua.ls Logo

Record system 20 RED Series User Manual

Default Icon
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User manual record system 20 RED
automatic door systems - this is record!
Translation of the original manual

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Record system 20 RED Series and is the answer not in the manual?

Record system 20 RED Series Specifications

General IconGeneral
BrandRecord
Modelsystem 20 RED Series
CategoryDoor Opening System
LanguageEnglish

Summary

Safety Instructions and Regulations

Presentation of Warning Signs

Explains symbols used for warnings and notices for easier understanding.

General Safety and Accident Prevention Regulations

Outlines general safety rules and accident prevention measures for system operation.

Danger Zones

Details specific danger zones within the system and related hazards.

Intended Purpose of Use

Specifies the system is for pedestrian passage in dry areas, and other uses are not intended.

General Information

Maintenance and Regular Inspection

Details the requirement for technical inspections by service technicians at least twice a year.

Operating Instructions (RED)

Selection of Operating Modes (RED)

Explains how to select and customize door operation modes using the BDE-D control unit.

Manual Opening and Closing in Case of Failure (RED)

Manual Opening (without Manual Unlocking Device)

Step-by-step guide to manually open the door when power is off and it's locked.

Manual Closing

Details the procedure for manually closing the door, including steps for initial attempts and further actions if unsuccessful.

Emergency Opening of the Door (RED)

Emergency Opening in Case of Power Failure with Auxiliary Battery (RED)

Describes how an auxiliary battery triggers a single door opening during a power failure.

Behavior in Event of Faults

Possible Troubleshooting

Offers guidance on troubleshooting based on status displays and advises contacting the service center with specific information.

Resetting the Control Module

Provides instructions to restart the control unit to remedy malfunctions, including safety precautions.

Control Unit BDE-D Does Not React

Details steps to reset the BDE-D control panel hardware if it becomes unresponsive.

Functions and Safety Check

Related product manuals