RED DSMC OPERATION GUIDE
COPYRIGHT © 2013 RED.COM, INC
955-0020_V5.1, REV-D | 63
SCALE
Percentage to scale guide from its maximum possible size. Available range is 0–100%.
WIDTH/HEIGHT
The Width/Height fields replace the Scale field when you select Absolute from the Mode drop-down menu. Se-
lect the values for the width and height of the guide in pixels.
OFFSET X/Y
Percentage to offset guide from its default centered position. Available range is 0–100%.
100%: Right-aligned (for X offset) and bottom-aligned (for Y offset).
-100%: Left-aligned (for X offset) and top-aligned (for Y offset).
APPEARANCE
Line Style: You can choose the following line styles: Solid, Dashed, or Bracket.
Color: Select a color for the guide. Select the color that provides maximum color contrast with the scene
you are shooting. The default is White.
Opacity: Set the guide opacity. Available options are 0%, 25%, 50%, 75% and 100%.
RELATIVE TO FRAME GUIDE
Only available on the Action Guide and Title Guide tabs.
Select this check box so that the guide is sized and positioned relative to (and bounded by) the Frame Guide
instead of the record format.
GENERAL TAB
You can enable/disable and select the location (Relative To), color, and opacity of the following elements:
Center: The center crosshair.
Grid: Rule-of-thirds grid.
Shading: The shaded region outside of the area of interest.
TEST SIGNALS
Permits the video monitor outputs to be replaced with one of the following video test patterns:
Chip Chart
SMPTE Bars
LUMA RAMP
To enable a test signal, select the test signal box. To exit the test signal, tap the touchscreen once or press the
Enter or Menu button on the DSMC SIDE HANDLE or REDMOTE.
To Next Page
Loading...
