Redarc MANAGER 30 Manual

28
3 USER GUIDE
Modication of the ‘Advanced Settings’ menu items affect the way The Manager30 unit responds to charging situations.
Modication of these settings may result in the unit not functioning at 100% of its capacity. These settings should only
be modied if absolutely necessary and when the effects of the changes are 100% understood.
The Advanced Settings menu allow modication of settings relating to advanced
operations of The Manager30 unit.
The Remote Settings menu allows modication of the settings listed below.
Edit Selected Setting
Remote Settings Screen
Cycle through Settings
Cycle through Settings
Each setting can be adjusted using the ‘Up’ and ‘Down’ controls.
Conrm Setting Adjustment
Cancel Setting Adjustment
Adjust Setting (Up)
Adjust Setting (Down)
MaxCharge Current Setting
N/A
Remote Settings Screen
Restore Factory Settings Screen

Redarc MANAGER 30 Specifications

General

Battery Charging Capacity	30A
Input Voltage Range	9-32V DC
Output Voltage	12V DC
Standby Current Draw	<100mA
DC Input Fuse Rating	40A
Efficiency	Up to 95%
Battery Types	AGM, Gel, Calcium, LiFePO4
Protection Features	Over-voltage, under-voltage, over-temperature, short-circuit, reverse polarity