Redexim Verti-Drain 7521 - Rear Roller Extension Kit

24
16.1.4 REAR ROLLER EXTENSION KIT
The kit 211.752.002 can be mounted at the standard rear roller supports and moves the roller further
away from the moving parts inside the machine.
Since the rear roller is further away from the machine, special attention for shaking of the rear roller is
necessary under tough circumstances. If the shaking goes on for a longer while, the rear roller scraper
ends may break together with the rear roller bearings.
Assemble the kit the way it is drawn above. Tighten all bolts and nuts.
This kit can’t be used on 75 models with a wheel kit assembled ( the H models).