processing samples and lens’ life, when cleaning the mirror and lens. Should use a cotton swab dipped
in anhydrous alcohol to wipe slightly, to protect the surface of lens.
6.3.5 Do not place the inflammable and explosive materials in the laser reflecting area and around the
machine, do not place reflective materials on the platform.
6.3.6 During processing, the operator should not leave the machine without allowed, Should always pay
attention to the machine's working condition, Shutdown the power immediately for any abnormal
condition.
6.3.7 Ground Wire is very important, it must be fully grounded, and the machine's power supply and the
computer need to share the same power row and grounded.
R E D S A I L T E C H C O . , L T D
To Previous Page
Loading...
