12
Using your Redsbaby Jive
Folding and unfolding the Redsbaby Jive frame
To release the frame from the folded position:
1. Release the the frame fold lock on the left hand side of the frame.
2. Holding the frame on either side, gently lift the top half of the frame and
place on the ground.
3. Continue to lift the handle until the frame fold locks engage.
IMPORTANT: When the frame fold locks have been engaged correctly
and the frame has been fully opened, you will hear and feel a rm ‘click’.
To fold the frame
1. Remove the bassinet or seat unit if attached to the frame.
2. Simultaneously pull back on the frame fold locks on the left and right
hand side of the frame.
3. Gently fold the frame forwards and downwards until the frame fold
latches automatically engage.
Note: The frame fold latch will engage automatically.
4. Turn the handle bar inwards by pressing the buttons located on either
side simultaneously.
Tip: You can also fold the Redsbaby Jive with the seat connected in the
fully upright and forward-facing position.
Safe lifting and carrying of the Redsbaby Jive frame when folded
IMPORTANT: Do not lift or carry the Redsbaby Jive when a child is in it.
IMPORTANT: Do not lift or carry the Redsbaby Jive when fully assembled.
Only lift and carry when folded.
1. Always lift and carry the frame using two hands.
2. Ensure the frame fold locks are engaged.
WARNING:
• Make sure children are clear of any moving parts when you adjust the
Redsbaby Jive, otherwise they may be injured.
• Ensure the frame fold locks are engaged correctly before placing a child in
the Redsbaby Jive.
To Next Page
Loading...
