13
Engaging and releasing the brake
The brake is located next to the right rear wheel of the Redsbaby Jive.
The brake is identied by its red colour.
1. To engage the brake, press downwards and backwards on the brake
until you feel and hear a ‘click’.
2. To release the brake, press your foot forwards on the brake in the
opposite direction until the brake lock disengages.
IMPORTANT: Ensure you have disengaged the brake completely before
pushing your pram. If you hear a clicking sound, double check the brake
lock isn’t clicking on the rear wheel. It can be helpful to push your heel
downwards on the brake in the released position rmly to ensure the
brake lock is not touching the rear wheel.
Locking the front swivel wheels
1. Press downwards on the buttons located on top for the front wheel
housing until you hear and feel a ‘click’.
2. Push the Redsbaby Jive forwards until you hear a second click in both
front wheels.
2. To unlock, simply press the buttons again. When released successfully,
you will hear and feel a ‘click’.
Adjusting the handle
Simultaneously press the buttons located on either side of the handle and
move the handle to the desired height.
To Next Page
Loading...
