9
Assembly instructions
Frame
To release the frame from the folded position:
1. Place frame on the ground and position yourself behind the handle bar.
2. Release the automatic frame lock located on the left hand side of the
frame.
3. Holding the frame on both sides, gently lift the frame continuing until
the frame locks into place. When the frame has been fully opened, you
will hear and feel a rm ‘click’.
Brake component
The brake will come permanently assembled on your pram frame and
is located at the bottom of the frame in the right hand side and is red in
colour.
Rear wheels
Fit the rear wheels by clicking them into rear wheel housing located at
the back of the pram frame. You will hear and feel a rm ‘click’ when the
wheels are locked in place.
IMPORTANT: Ensure you check that the wheels are clicked in correctly
by tugging them outwards. Failure to attach the wheels correctly will
result in them falling o the pram while in use.
To remove, simply press the button in the middle of the wheel to release.
1
2
To Next Page
Loading...
