Reebok 1000 X Elliptical - Page 8

8
6. While a second person holds the Console (4)
near the Upright (3), connect the console wire to
the Wire Harness (46). Then, connect the con-
sole pulse wire to the Pulse Wire (64). Insert the
excess wire downward into the Upright.
Tip: Avoid pinching the wires during this
step. Attach the Console (4) to the Upright (3)
with four M4 x 16mm Screws (90).
6
90
64
4
Pulse
Wire
5. Slide the Upright Cover (6) downward to the
b
ottom of the Upright (3). Reattach the Upright
Cover with a #8 x 1 3/4" Screw (95).
5
95
6
3
46
Console
Wire
3
Avoid pinching the
wires during this step