To Next PageTo Next PageWhat to do if the Reebok Challenger 150 power does not turn on?
First, ensure that the power cord is correctly plugged into a surge suppressor, and that the surge suppressor is plugged into a grounded outlet. Next, check that the key is properly inserted into the console. Finally, verify the power switch; if it's tripped (protrudes), wait five minutes, then press it back in to reset.
Why does my Reebok Challenger 150 Treadmill power turn off during use?
If your treadmill turns off unexpectedly, first check the power switch. Ensure the power cord is securely plugged in. Also, try removing the key from the console and then reinserting it to see if that resolves the issue.
What to do if the walking belt is off-center or slips when walked on my Reebok Challenger 150?
If the walking belt has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn. If the walking belt slips when walked on, remove the key and unplug the power cord, then use the hex key to turn both idler roller screws clockwise 1/4 of a turn.
How to fix a Reebok Treadmill walking belt that slows down when I walk on it?
If the walking belt is overtightened, remove the key and unplug the power cord. Then, using the hex key, turn both idler roller screws counterclockwise, 1/4 of a turn.
General| Motor Power | 2.25 HP |
|---|---|
| Running Surface | 45cm x 130cm |
| Speed Range | 0.5 - 10 mph |
| Display Type | LCD |
| Programs | 36 |
| Heart Rate Monitoring | Yes |
| Folding | Yes |
| Motor | 2.25 HP |
| Weight Capacity | 120 kg |
