EasyManua.ls Logo

Reebok RBTL17910 - User Manual

Reebok RBTL17910
38 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
USER'S MANUAL
®
Serial Number
Decal
Model No. RBTL17910
Serial No.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this man-
ual for future reference.
Write the serial number in the space
above for future reference.
Patent Pending
QUESTIONS?
If you have questions, or if there
are missing or damaged parts,
we will guarantee complete sat-
isfaction through direct assis-
tance from our factory.
TO AVOID UNNECESSARY DE-
LAYS, PLEASE CALL DIRECT TO
OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our Customer Hot Line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.–Fri., 6 a.m.–6 p.m. MST
®
®
Visit our website at
www.reebokhomefitness.com
new products, prizes,
fitness tips, and much more!

Table of Contents

Questions and Answers

  • D
    Dawn KramerAug 8, 2025
    How to turn on my Reebok RBTL17910?
    • C
      Christopher RamseyAug 9, 2025
      First, ensure the power cord of your Reebok Treadmill is plugged into a surge suppressor, and the surge suppressor is connected to a grounded outlet. Use a single-outlet surge suppressor meeting the specifications on page 9. Note that the treadmill isn't compatible with GFCI outlets. Also, make sure the key is fully inserted into the console. Check the on/off switch located near the power cord to ensure it's in the 'on' position. Finally, examine the circuit breaker; if the switch protrudes, wait five minutes before pressing it back in to reset.
  • K
    kimberlyhernandezAug 12, 2025
    What to do if my Reebok RBTL17910 Treadmill turns off during use?
    • S
      Sandra GuzmanAug 12, 2025
      If your Reebok Treadmill turns off during use, check the circuit breaker located near the power cord. Ensure the power cord is securely plugged in; if it is, unplug it, wait five minutes, and plug it back in. Also, remove and reinsert the key fully into the console, and verify that the on/off switch is in the 'on' position.
  • C
    Charles DiazAug 16, 2025
    Why is the walking belt on my Reebok RBTL17910 off-center or slipping?
    • B
      becktammyAug 16, 2025
      If the walking belt of your Reebok Treadmill is off-center, remove the key and unplug the power cord. For a belt shifted to the left, turn the left rear roller bolt clockwise 1/2 turn; for a shift to the right, turn the bolt counterclockwise 1/2 turn. If the belt slips, unplug the unit and turn both rear roller bolts clockwise 1/4 turn. Ensure proper tightness, allowing a 3-4 inch lift on each side. Keep the belt centered, then plug in the power cord, insert the key, and walk on the treadmill briefly.
  • K
    Kenneth DaughertyAug 21, 2025
    Why does the walking belt on my Reebok Treadmill slow down when I walk on it?
    • K
      kari93Aug 21, 2025
      If the walking belt of your Reebok Treadmill slows down when walked on, use a single-outlet surge suppressor that meets the specifications on page 9. If the walking belt is overtightened, remove the key and unplug the power cord. Use an allen wrench to turn both rear roller adjustment bolts counterclockwise 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key, and run the treadmill for a few minutes.
  • I
    Ian BakerAug 26, 2025
    How to fix the Speed/Minutes-Mile display on my Reebok RBTL17910?
    • P
      pwarrenAug 26, 2025
      If the Speed/Minutes-Mile display on your Reebok Treadmill console isn't working correctly, remove the key and unplug the power cord. Take off the screws from the hood and carefully remove it. Find the Reed Switch and the Magnet on the left side of the Pulley. Ensure the gap between them is about 1/8 inch. If needed, loosen the Reed Switch Screw and adjust the Reed Switch slightly. Put the hood back on and test the treadmill for a correct speed reading.
  • L
    Linda DavenportAug 30, 2025
    Why do the displays and indicators on my Reebok Treadmill console stay lit after the key is removed?
    • P
      Peter MolinaAug 30, 2025
      If the displays on your Reebok Treadmill console stay lit after removing the key, and a 'd' appears, the console is in 'demo' mode. To exit this mode, hold down the STOP button while inserting the key. Ensure there's no 'd' in the CALS/FAT CALS display; if there is, press the SPEED – button until the display is blank, then remove the key.
  • S
    Sharon RobertsSep 3, 2025
    What to do if the heart rate monitor on my Reebok RBTL17910 Treadmill doesn't function properly?
    • D
      David WalshSep 3, 2025
      If the heart rate monitor on your Reebok Treadmill isn't working, the battery may need to be changed. Locate the battery cover on the back of the sensor unit, insert a coin into the slot, and turn the cover counterclockwise to the 'open' position to replace the battery.

Reebok RBTL17910 Specifications

General IconGeneral
BrandReebok
ModelRBTL17910
CategoryTreadmill
LanguageEnglish

Related product manuals