Reed Instruments R8080 User Manual

8
1. Press the MIN/MAXButtononcetodisplaythemaximumvalue.
2. Press the button again to display the minimum value.
3. Press and hold the button once more to resume normal operation.
Auto Power OFF
To preserve battery life, the meter is programmed to turn itself off after 30
minutes of inactivity. To turn this function off, while the meter is off, press
and hold the FAsT/slOw Button while turning the meter on. When the
meter turns on release both the FAsT/slOw Button and Power button.
The Auto Power Off indicator will not appear on the display, conrming
this feature is now disabled. If the meter is turned off then back on, the
"Auto Power Off" feature will be enabled again.
NOTE: The Auto Power Off is disabled during data logging or when the
meter is connected to a PC.
Backlight
Press the Backlight Button to turn the LCD Backlight on and off. The
backlight will automatically turn off after 30 seconds.
Setting the Date and Time
In order to set the time and date on the meter, follow steps 1 through 5.
1. While the meter is off, enter the Setup mode by pressing and holding
the Power Button and A/C buttons simultaneously. "Set" will ash on
the display indicating you are in the Setup mode.
2. Press the MIN/MAX(Clock)buttontoenterthetimeanddate
setup screen.
3. PresstheUpandDownarrowstoadjusttheyear.
4. Press the MIN/MAX(Clock)buttonagaintotogglethroughMonth,
Day,Hour(24-hours),MinutesandSeconds.Duringeachselection
theUpandDownarrowscanbeusedtoadjusttheselectedvalue.
5. Press the MIN/MAX(Clock)buttonaftersecondstosaveandexit
the Setup mode.
NOTE:PressthePowerbuttontoexitSetupmodeatanytime.
REED Instruments
1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com

Reed Instruments R8080 Specifications

General

Brand	Reed Instruments
Model	R8080
Category	Measuring Instruments
Language	English