EasyManuals Logo

Reer MOSAIC M1S Quick Installation Guide

Reer MOSAIC M1S
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
8549156 • 15/12/2021 • Rev.0 13
MOSAIC M1S - MASTER MODULE
English
INSTRUCTIONS CONCERNING CONNECTION CABLES.
Wire size range: AWG 12÷30, (solid/stranded) (UL).
Use 60/75°C copper (Cu) conductor only.
We recommend the use of separate power supplies for the safety
module and for other electrical power equipment (electric motors,
inverters, frequency converters) or other sources of disturbance.
Cables used for connections of longer than 50m must have a cross-
section of at least 1mm
2
(AWG16).
MOSAIC M1S master module
TERMINAL
SIGNAL
TYPE
DESCRIPTION
OPERATION
1
24VDC
-
24VDC power supply
-
2
NC
-
-
-
3
NC
-
-
-
4
0VDC
-
0VDC power supply
-
5
OSSD1
Output
Solid State Safety Output 1
PNP active high
6
OSSD2
Output
Solid State Safety Output 2
PNP active high
7
RESTART_FBK1/
STATUS1
Input/
Output
Feedback/Restart 1
Input according to EN 61131-2
Programmable signal output
PNP active high
8
RESTART_FBK2/
STATUS2
Input/
Output
Feedback/Restart 2
Input according to EN 61131-2
Programmable signal output
PNP active high
9
OSSD3
Output
Solid State Safety Output 3
PNP active high
10
OSSD4
Output
Solid State Safety Output 4
PNP active high
11
RESTART_FBK3/
STATUS3
Input/
Output
Feedback/Restart 3
Input according to EN 61131-2
Programmable signal output
PNP active high
12
RESTART_FBK4/
STATUS4
Input/
Output
Feedback/Restart 4
Input according to EN 61131-2
Programmable signal output
PNP active high
13
OUT_TEST1
Output
Short circuit detected output
PNP active high
14
OUT_TEST2
Output
Short circuit detected output
PNP active high
15
OUT_TEST3
Output
Short circuit detected output
PNP active high
16
OUT_TEST4
Output
Short circuit detected output
PNP active high
17
INPUT1
Input
Digital input 1
Input according to EN 61131-2
18
INPUT2
Input
Digital input 2
Input according to EN 61131-2
19
INPUT3
Input
Digital input 3
Input according to EN 61131-2
20
INPUT4
Input
Digital input 4
Input according to EN 61131-2
21
INPUT5
Input
Digital input 5
Input according to EN 61131-2
22
INPUT6
Input
Digital input 6
Input according to EN 61131-2
23
INPUT7
Input
Digital input 7
Input according to EN 61131-2
24
INPUT8
Input
Digital input 8
Input according to EN 61131-2

Other manuals for Reer MOSAIC M1S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Reer MOSAIC M1S and is the answer not in the manual?

Reer MOSAIC M1S Specifications

General IconGeneral
BrandReer
ModelMOSAIC M1S
CategoryController
LanguageEnglish

Related product manuals