Reflecta RPS 10M - Step 6: Scan; Step 7: Exit

14 15
English
STEP 6 –
s can
scan - scan- scan Current Frame
t his begins the scan to file process
all scaned images will be saved to the directory location set previously,
the factory default locations are:
Windows: C:\users\[Your na me \ d ocuments;
MAC: mac
Hd\users\[Your name]\Pictures\Cyberview i mages),
STEP 7 – Exit
select “scan > exit” to close the driver. scanned image files can be open/edited
with any image editing software.
NOTE: if using the supplied image editor, for help with this application see the users Help
from within the application
Manual-RPS10M.indd 15 23.12.2016 10:00:32