Rev H REF TEK 130-GPS Users Guide 5/20/2021
96259-00-UG
24 Reftek Systems Inc.
1. Supply the indicated information at time of contact.
Description of Problem
Type of Instrument
Model No.
Serial No.
2. Package the equipment safely, preferably using the original packing materials. Include the RMA on
the outside of the shipping container, a return address where the repaired equipment can be shipped
and a contact telephone number.
Note: It is advised to use a shipping company that can provide a tracking number.
3. Ship the unit to the this address, freight prepaid:
Reftek Systems Inc.
75 MacDonald Ave, Unit#1
Dartmouth, Nova Scotia
B3B 1T8 Canada
Static sensitive device protection
WARNING:. All REF TEK circuit boards are Static Sensitive and appropriate handling is
required to protect each board from damage due to static discharge
1. Please insure that when handling REF TEK circuit boards, the handler and the work bench are grounded.
This is usually done via a grounding mat on the bench, which is ultimately grounded to the building
ground and also attached to the handler.
2. When shipping individual boards they must be wrapped in anti-static protection, either anti-static bags
or boxes. REK TEK can supply these if requested.
3. Failure to protect against static increases the chance of boards being damaged and may void REF TEK
warranty.
To Next Page
Loading...
Need help?
General
