To Next PageTo Next Page
Need help?Do you have a question about the Reftek 130-MC and is the answer not in the manual?
General| Channels | 3 |
|---|---|
| Resolution | 24-bit |
| Sampling rates | 1 to 1000 samples per second |
| Input voltage range | ±10 V |
| GPS | Integrated GPS receiver |
| Data storage | 32 GB internal flash memory |
| Frequency Response | DC to 0.8 x sample rate |
Describes operations and maintenance requirements for the REF TEK 130-MC.
Explains the 130-MC system's role as a seismic recorder for various applications.
Details the connections and cables used within the 130-MC enclosure.
Explains the modular design and the primary boards forming the 130-MC connection system.
Addresses common user queries regarding data loss, Compact Flash, and sampling rates.
Covers warranty statements, non-warranty service, and RMA procedures for REF TEK instruments.
Provides essential guidelines for handling circuit boards to prevent damage from static discharge.
Outlines topics covered in the command line operation section, including setup and configuration.
Guides users through initial system power-up, hardware connections, and basic configuration.
Explains DAS control and general recorder operations using command line or SMCC.
Details available communication ports (Serial, Ethernet, Modem) and modem considerations.
Describes how the 130-MC interacts with GPS for timing and clock synchronization.
Instructions for clearing RAM and formatting disks using the Media Format (MF) command.
Covers defining modem power windows, delay times, baud rates, and initialization strings.
Introduces topics related to SMCC settings, including DAS control and modem configurations.
Explains how to communicate with and control the 130-MC using the SMCC program.
Details port configurations and modem setup within the SMCC interface.
Explains the use of the SLM modem module with the REF TEK 130-MC.
Provides procedures for operating the 130-MC with the SLM modem and configuring it via SMCC.
Describes features and maintenance requirements for the REF TEK 130-03 component.
Explains the 130-MC system's purpose and provides a diagram of the 130-03 unit.
Details various connectors like Power, Serial, GPS, Modem, Net, Relay, and Channel connectors.
Lists the hardware boards that form the 130-MC/12 and 130-03/18 systems.
Provides information on assembly and disassembly procedures for the 130-03 unit.
Step-by-step instructions for disassembling and reassembling the 130-03 for service.
Details the temporary shallow water submersion test procedure for enclosure compliance.
Introduces maintenance procedures to enhance the effectiveness and lifespan of the 130-MC.
Guides on replacing the Compact Flash and RAM Backup Battery for the 130-03 DAS.
Recommended periodic maintenance and usage guidelines for connectors.
Instructions for updating firmware via PC or RT130-SM and resetting the unit.
Shows sample LCD displays for various statuses like power, GPS, modem, and acquisition.
Provides lists and connections for internal cables used in the 130-03 family and 130-MC.
