Reftek 130-MC - Operation with Command Line; Overview; Getting Started and Quick Installation

Rev G REF TEK 130 Multi-Channel Users Guide 5/14/2021
96223-00-UG
Reftek Systems Inc.
2 Operation with command line
Overview
This section provides information on the following topics:
o Getting started with the 130-MC and quick power up.
o Minimum hardware configuration.
o General operation with command line control
o DAS control with the command line
o Port settings and modem communications
o General GPS operations
o Example configuration with a command set
o Format Media
Getting started with your 130-MC
This introductory material provides the following:
o A brief procedure to establish minimal hardware connections for the recorder in order to
perform an initial system power-up.
o External cables required.
o Minimum hardware connection and power-up.
o A procedure to specify an abbreviated set of operating parameters, start and verify data
acquisition, and save collected data to a file.
These instructions do not provide you with the detailed comprehensive information you need to
prepare your recorder for field deployment and ‘real’ data collection. The complete process to
establish all hardware connections, select and implement parameters, and perform data
acquisition is only outlined in this section for rapid familiarization.
Consult the Command Line Reference manual for detailed descriptions.
The SMCC command and control program is a multi-platform REF TEK program for command-line
command and control of the 130-MC over a TCP/IP (LAN/WAN) connection through RTPD or
through a serial connection. SMCC is a client-server application that serves up HTML pages to
web browser clients.