Reftek 130-MC - 130-MC System Connections

82 pages

Save Page as PDF

To Next Page

To Previous Page

Rev G REF TEK 130 Multi-Channel Users Guide 5/14/2021

96223-00-UG

4 Reftek Systems Inc.

130-MC System Connections

The connections and cables used in the 130-MC enclosure are as follows:

Main Page

Table of Contents5
MC18 Overview9
Introduction9
Purpose of the 130-MC11
130-MC System Connections12
Power Terminals13
GPS 232 Terminals14
GPS 485 Terminals14
MC-18 Interconnect15
RT590 Connections and Jumpers17
Modem Connector18
130-MC Net Connector19
Relay RT590 Connector20
Channels 1-6 RT588 Connector21
Connection Diagram22
Channels 7-12 RT588 Connector23
Channels 13-18 RT588 Connector24
Hardware Modularity25
130-MC List25
List of Other Hardware26
Frequently Asked Questions26
Warranty Statement27
Warranty/Non-Warranty Service27
Static Sensitive Device Protection28
Operation with Command Line29
Overview29
Getting Started with Your 130-MC29
Minimal Hardware Connections30
Quick Installation Steps30
DAS Control Overview31
General Recorder Operation with Command Line Control31
Example Configuration32
Power Considerations33
Port Settings and Modem Communications34
130-03 Command Port (Serial)35
Ethernet Port35
Toss Parameter36
Internal Modem Port37
Optional External Modem Port37
General GPS Operations38
Formatting Media39
Clear RAM on the 130-MC39
Format a Disk in the 130-MC39
Check Status of a Media Device on the 130-MC39
Modem Configuration40
Define a Window for External Modem Power40
Define a Delay Time to Initialize a Modem40
Modem Setup41
Set the Baud Rate41
Configure the Modem Initialization String41
Modem Dial out Strings42
Configure the Modem Hang-Up String42
130-MC Settings with SMCC43
Overview43
DAS Control with SMCC Overview43
Port Settings and Modem Communications45
130-03 Command Port (Serial)46
Ethernet Port46
Toss Parameter47
Internal Modem Port47
Optional External Modem Port47
Internal Modem Support49
Internal SLM Modem and the RT58049
Operating the 130-MC with the SLM Modem50
SLM Modem Module50
Modem Features50
SMCC Modem Configuration50
Configure the Modem Initialization String51
Modem Dial out Strings51
Modem Power Time Windows51
Delay Time/Speed52
130-03 Features53
Introduction53
Purpose of the 130-MC System54
130-03 Diagram54
Power Connector56
130-03 Serial Connector56
GPS Connector57
Modem Connector (Part of Relay Connector)57
130-03 Net Connector58
Relay Connector59
Channels 1-6 Connector60
Channels 7-12 Connector61
Channels 13-18 Connector62
Hardware Modularity63
130-03 List of Hardware63
130-03 Boards64
130-03 Assembly65
Introduction65
Disassembly of the 130-03 for Service65
Assembly of the 130-0366
130-03 REF TEK IP67 Test66
Temporary Shallow Water Submersion Test Procedure66
Periodic Maintenance Operations67
Introduction67
Replacing the Compact Flash68
Connector Assembly & Maintenance70
RAM Backup Battery Replacement72
Disassembly of the 130-03 for Service73
Update Firmware74
Update the Firmware of a 130-MC Using a PC74
Update the Firmware if at the 130-MC74
To Transfer Firmware to the 130-MC Using RT130-SM74
Reset the 130-MC Using RT130-SM75
Sample 130-03 LCD Displays76
130-MC Internal Cable Drawings77
130-03 Cable List77
130-MC Cables77
Index79

Reftek 130-MC - 130-MC System Connections

Table of Contents

Related product manuals