REFUsol 20K-2T (853P020.200)
User manual
4.Installation
Outlines of this Chapter
This topic describes how to install this product, please read carefully before install.
Do NOT install the product on flammable material.
Do NOT store this product in potentially explosive
atmospheres
The enclosure and heat sink will get hot during operation,
please do not mount the product at a easy to reach location
Consider the weight of this product when doing transport
and moving.
Choose an appropriate mounting position and surface.
At least two persons for installation
4.1. Installation Process
4.2. Checking Before Installation
Checking Outer Packing Materials
Before unpacking, please check the condition of the outer package materials if any
damaged found, such as holes, cracks, please not unpack the product, contact your
distributor immediately. Recommend installing the product within 24 hours after
unpacking the package.
To Next Page
Loading...
