REFUsol 20K-2T (853P020.200)
User manual
1.Basic Safety Information
Outlines of this Chapter
Please read the instruction carefully. Faulty operation may cause serious injury or
death.
Safety Instruction
Introduce the safety instruction during installation and operation of REFUSOL
20K-2T (853P020.200)
Symbols Instruction
This section gives an explanation of all the symbols shown on the inverter and on
the type label.
1.1. Requirement for Installation and Maintenance
Installation of REFUSOL 20K-2T (853P020.200) on-grid inverter must conform with
laws, regulations, codes, and standards applicable in the jurisdiction.
Before installing and adjusting the produce, please read all of instructions, cautions
and warnings in this manual.
Before connecting the product to the electrical utility grid, contact the local utility
company for allowance. Also, this connection must be made only by qualified
electrician.
If the failure persists, please contact the nearest authorized maintenance center. If
you don't know which service center is closest to you, please contact your local
distributor. Don't repair the product by yourself, which may lead serious injury or
damage.
If you have any question or problem when you read the
following information, please contact REFU Elektronik GmbH.
To Next Page
Loading...
