REFUSOL 20K-2T - Inverter Storage

REFUsol 20K-2T (853P020.200)
User manual
- 14 -
3.Inverter Storage
If inverter is not installed immediately, storage condition need to meet below
requirements:
 Place inverter into the original package and leave desiccant inside, sealed
tight with taps.

Keep the storage temperature around -40
℃ ～
70
℃
, Relative humidity 0
～
95%, no condensation.
Figure 3-1 Storage temperature and humidity
 The maximum stacking layer number cannot exceed 4 layers.
 If the inverter be storage for more than half years, the inverter needs to be
fully examined and tested by qualified service or technical personnel before
using.