16
Troubleshooting
(Power on, power switch LED lit but no output)
Check the amplifier is
connected to the desired
input and the correct input
is selected
Check the power amplifier(s) is
correctly connected and switched on,
and the speakers are correctly
connected (refer to relevant manuals)
Check the volume is set
to the correct level and
mute is off
If CD is selected check
there is a disc in the
machine
If problem persists, contact your Rega dealer
Cursa 3 manual.qxd 10/12/2002 15:23 Page 17
To Next Page
Loading...
