Need help?Do you have a question about the Rega SYSTEM ONE and is the answer not in the manual?
General| Turntable | Rega Planar 1 |
|---|---|
| Drive System | Belt drive |
| Speed | 33 1/3 and 45 RPM |
| Tonearm | Rega RB110 |
| Cartridge | Rega Carbon |
| Phono Stage | Built-in |
| Amplifier | Rega io |
| Speakers | Rega Kyte |
| Platter | Phenolic resin |
| Output | RCA |
| Type | Complete turntable system |
| Motor | 24V low noise |
Connect power and phono, install platter, mat, and dust cover.
Set downforce, connect balance weight, and remove stylus guard.
Turn on the turntable and adjust playback speed.
Position amplifier for airflow and follow safety warnings.
Details on connecting sources and speakers via rear panel ports.
Explains amplifier controls like power, input select, and volume.
Instructions for attaching rear feet and connecting speaker terminals.
Guidance on optimal speaker placement and optional stand adaptor.
Information on replacing speaker drive units.
Technical details for amplifier inputs, outputs, impedance, and power consumption.
Amplifier frequency response, RIAA accuracy, and fuse ratings.
Technical details of the KYTE speaker system, cabinet, and impedance.
Specifications for KYTE speaker drivers and power handling capacity.
To Next Page
