Regada Rematic - Conservation, Packing, Transport, Storing and Unpacking

12 STR 0PA
1.10 Conservation, packing, transport, storing and unpacking
Surfaces without surface treatment are treated by conservation preparation MOGUL LV 2-3
before packaging .
Conservation is not necessary if the following storage conditions are complied with:
• Storage temperature: -10 to +50 °C
• Relative air humidity max.80 %
• Electric actuators and their accessories must be stored in dry, well ventilated covered spaces,
protected against impurities, dust, soil humidity (by placement to racks, or on palettes), chemicals
and foreign interventions
• There shall be no corrosive gases present in the storage areas.
The EA are delivered in solid packages guaranteeing resistance in accordance with IEC 60 654.
Package is a box. Products in boxes is possible to load on the pallets (pallet is returnable). On
the outer side of the package is stated:
• manufacturer label,
• name and type of product,
INTERNAL
PROTECTION
TERMINAL
Fig.1a
FUSE SUPPLY (F3)
EXTERNAL
PROTECTION
TERMINAL
Fig.1b