Please read these instructions carefully before mounting and operating the actuator!
Preventive and safety-measures applied on the actuator can not offer required safety level till the actuator and its
safety systems are not applied by required and described way and if installation and maintenance is not applied
according to applicable instructions and rules!
Contents
1. General data......................................................................................................................2
1.1 Purpose and applications...............................................................................................2
1.2 Safety instructions..........................................................................................................2
1.3 Warning for safety use....................................................................................................3
1.4 Data specified on electric actuator..................................................................................3
1.5 Guaranty Conditions.......................................................................................................3
1.6 Under-guarantee and after-guarantee service................................................................3
1.7 Operation conditions.......................................................................................................4
1.8 Description......................................................................................................................6
1.9 Basic specifications........................................................................................................8
1.10 Conservation, packing, transport, storing and unpacking..........................................12
1.11 Assessment of the product and packaging and removal of contamination................13
2. Installation and dismantling of actuator............................................................................14
2.1 Installation....................................................................................................................14
2.2 Dismantling...................................................................................................................17
3. Adjusting of actuator........................................................................................................17
3.1 EA control set-up options (regulating)..........................................................................19
3.2 Procedure for setting individual parameters and the register of errors and warnings...21
3.3 Putting an EA into operation when the EA is set up and connected with the armature
already in the production plant (starting the calibration)......................................................22
3.4 Putting an EA into operation when the stroke and parameter setting done by the
producer suit to your needs.................................................................................................22
3.5 Putting an EA into operation when it is necessary to do a change to the stroke (setting
new end positions), and the other parameter setting done by the producer suits to your
needs..................................................................................................................................23
3.6 Setting other parameters..............................................................................................23
3.7 Gear unit adjustment....................................................................................................23
3.8 Error messages from the control unit............................................................................24
4. Service and Maintenance.................................................................................................24
4.1 Service..........................................................................................................................24
4.2 Maintenance - extent and periodicity............................................................................25
4.3 Troubleshooting............................................................................................................25
5. Accessories and spare parts............................................................................................27
5.1 Accessories..................................................................................................................27
5.2 Spare part list...............................................................................................................27
6. Enclosures.......................................................................................................................28
6.1 Wiring diagrams............................................................................................................28
6.2 Dimensional drawings...................................................................................................30
6.3 Guarantee service check report....................................................................................42
6.4 Post guarantee service check report............................................................................43
6.5 Commercial representation...........................................................................................44
Edition: 01/2019
The right of changes reserved!
Nr.: 74 1050 02
To Next Page
Loading...
