Equipment Operation
6-67
To lower the wakesport tower it is easier when one person holds the
aft aluminum framework while another person unfastens the hardware.
Simply unscrew the knobs one at a time and remove the tower arm.
Use the same process on both sides. With the tower arms removed
lower the tower until it fits in the cradles. Fasten each side with one
knob. This will lock the unit down in the low bridge clearance position.
To completely remove the wakesport tower from the boat unfasten
the front knobs as well as the rear ones. Be careful with the tower once
the knobs are removed since it could become unstable. It may require
more people to lower it safely from the boat. See the illustrations below.
Removable
Arm
w/ Knobs
Lowering
Tower
Into Cradle
Tower Seated
In Cradle w/
Knobs
To Next Page
Loading...
