Cosmetic Care & Maintenance
7-5
wear. These do not affect the strength of the hull or deck and can be
repaired by yourself, a marine professional or a Regal dealer.
The affected area should be chipped or sanded away and a thin layer
of color matched gelcoat applied. This layer is then sanded smooth
and buffed to its original luster.
Most minor scratches, nicks, and dents can be removed by compound-
ing the surface. Marine type compounds can be found at most auto
body supply stores. Specify a number 25 which is a coarser compound
up to a number 55 being less coarse. Various glazes and polishes are
available as needed. Ask your marine professional or Regal dealer for
more information. Fiberglass hulls are strong but they can be dam-
aged. A fiberglass hull has virtually no internal stresses. Thus when a
part is broken or punctured, the rest of the hull retains its original
shape. A severe blow will either be absorbed or result in a definite
localized break. A break of this nature should be checked and repaired
by a marine professional or a Regal dealer.
Minor Repairs
You will need the following materials for minor repairs:
• Gelcoat
• Clear Liquid Catalyst
• Putty Knife
• Razor Blade
• Fine Sandpaper (400,600,1000)
• Wax Paper (to cover repair area)
!
AVOID BODILY INJURY!
GELCOAT & FIBERGLASS RESIN ARE FLAMMABLE
WORK IN A WELL VENTILATED AREA FREE FROM
OPEN FLAMES. DO NOT SMOKE!
To Next Page
Loading...
