Regency F3500 - User Manual

Other manuals for Regency F3500

Owners And Installation Manual40 pages

Instruction Manual8 pages

Questions and Answers

R
Robert SmithAug 18, 2025
What to do if my Regency Wood stove has fly-ash build-up?
- M
  Michael EsparzaAug 18, 2025
  If your Regency Wood stove has fly-ash build-up, it might be because the combustor hasn't maintained light-off temperature or you are burning materials that produce a lot of char and fly-ash, or you are closing the bypass too soon. Brush the cold combustor with a soft bristled brush or vacuum it lightly. Avoid burning cardboard, gift wrap, or garbage. Ensure you follow the instructions for proper light-off.
J
johnsongregAug 20, 2025
Why is my Regency F3500 Wood stove plugging with creosote?
- K
  kristen03Aug 20, 2025
  Your Regency Wood stove might be plugging with creosote because you're burning wet, pitchy woods or large loads of small diameter wood without proper light-off. To resolve this, burn dried, seasoned wood and ensure the combustor has light-off before closing the bypass damper. After starting a hot fire, you can try burning off the soot or creosote accumulation by placing the combustor in a partially open position.
A
aaron58Aug 23, 2025
What to do if my Regency Wood stove combustor has mechanical cracks?
- J
  Jamie RamirezAug 23, 2025
  Mechanical cracks in your Regency Wood stove combustor may be due to mishandling or distortion of the combustor holder. Handle the combustor with care and replace it if necessary. If large pieces are missing, replace any warped stove parts as well.
D
David NashAug 26, 2025
What to do if my Regency F3500 Wood stove combustor is masking with soot?
- J
  jgordonAug 26, 2025
  If your Regency Wood stove combustor is masking with soot, it could be because the combustor hasn't maintained a light-off, or burning coal. To address this, place the combustor in a partially open position after a hot fire has been started to burn off the soot accumulation. If burning coal caused the issue, revert to burning wood and fire the combustor to elevated temperatures for one hour.
T
Travis MoralesAug 28, 2025
How to prevent crumbling substrate in my Regency Wood stove?
- D
  Dylan KempAug 28, 2025
  Crumbling substrate in your Regency Wood stove can be caused by extreme thermal shock, refueling with wet wood, or high draft. To prevent this, bypass the combustor when the stove is running. Use seasoned, dried wood, and do not exceed .06" of water draft. Install a manual damper and draft gauge or a barometric damper.
T
Tyler BridgesAug 30, 2025
What causes thermal cracking in a Regency Wood stove combustor?
- B
  bridget72Aug 30, 2025
  Thermal cracking in your Regency Wood stove combustor is caused by uneven temperatures, flame impingement, and heat spikes. If cracking causes large pieces to fall out, replace the combustor.
M
Michael EdwardsSep 2, 2025
How to prevent creosote plugging in my Regency F3500?
- J
  Jo OconnorSep 2, 2025
  To prevent creosote plugging, burn only dried, seasoned wood in your Regency Wood stove. Ensure the combustor achieves light-off before closing the bypass damper. If soot or creosote has accumulated, try burning it off by placing the combustor in a partially open and partially closed position after starting a hot fire.
K
Kyle GarciaSep 4, 2025
What to do if soot is masking the combustor in my Regency Wood stove?
- R
  Ronald LowerySep 4, 2025
  If soot is masking the combustor, and the combustor has not maintained a light-off, place the combustor in a partially open and partially closed position after a hot fire has been started to burn off the soot accumulation. If you've been burning coal, switch back to wood and fire the combustor at high temperatures for an hour to remove sulfur-based compounds.
M
Mark RandallSep 7, 2025
Why is there fly-ash build-up in my Regency Wood stove?
- E
  efergusonSep 7, 2025
  Fly-ash build-up can occur if the combustor hasn't maintained its light-off temperature. Brush the cold combustor with a soft bristled brush or vacuum it lightly. Avoid burning materials like cardboard, gift wrap, or garbage, and follow the correct light-off instructions. Also, avoid closing the bypass too soon.
Q
qcooperSep 9, 2025
What to do if my Regency F3500 combustor has thermal cracking?
- T
  tinaquinnSep 9, 2025
  Thermal cracking is caused by uneven temperatures, flame impingement, and heat spikes. If cracking causes large pieces to fall out of your Regency Wood stove, replace the combustor.

Summary

Safety Decal

Safety Label for F3500

Details the safety warnings and precautions on the appliance's label.

Unit Dimensions

F3500 Stove Dimensions

Provides detailed measurements and diagrams of the F3500 woodstove.

Installation

Residential Installation Guide

Step-by-step guide for installing the woodstove in a residential setting, including modular options.

Stove Assembly

Component Installation and Adjustment

Instructions for assembling Airmate, heat deflector, logo, and adjusting side shields.

Installation Clearances

Installation Clearance Requirements

Specifies minimum distances to combustible materials for residential, mobile home, and alcove installations.

Wall Exit Clearance

Factory Built Chimney Wall Exit

Clearance requirements for wall exit installations using factory-built chimneys.

Masonry Fireplace Installation

Connecting to Masonry Fireplace

Guidance on using kits to connect the stove to a masonry fireplace.

Combustible Wall Pass-Throughs

Chimney Connector Pass-Through Methods

Details various methods for passing chimney connectors through combustible walls.

Floor Protection

Ember Protection Requirements

Specifies requirements for protecting combustible floors from embers.

Chimney and Connector Installation

Step-by-Step Installation Guide

Provides a sequential process for installing the chimney and connector.

Recommended Flue Heights

Flue Height Calculations

Guidelines and tables for determining optimal woodstove flue heights based on elevation and bends.

Mobile Home Installation

Specific Requirements for Mobile Homes

Mandatory guidelines for installing the woodstove in mobile homes.

Optional Outside Air Kit

Outside Air Kit Installation and Options

Instructions for installing the damper and connecting the outside air kit through pedestal rear or bottom.

Listed Components for Mobile Home Installation

Component Compatibility for Mobile Homes

Lists approved components for mobile home installations from various manufacturers.

Smoke Deflector Installation

Stainless Steel Smoke Deflector Procedure

Procedure for installing and replacing the stainless steel smoke deflector.

Brick Installation

Firebrick Layout and Installation Guide

Guide for installing firebricks to extend stove life and radiate heat evenly.

Removable Door Handle

Handle Usage and Storage

Instructions on using and storing the removable door handle for safety.

Fan Installation and Operation

Fan Installation and Operation Modes

Steps for installing the 120V fan and operating it automatically or manually.

Seasoned Firewood

Firewood Preparation and Selection

Guidance on selecting and preparing seasoned firewood for efficient burning.

Operating Instructions

First Fire and Draft Control

Steps for the first fire, draft control operation, and initial stove warming.

Ash Disposal

Safe Ash Removal and Handling

Procedures for safely removing and disposing of ashes from the stove.

Safety Guidelines and Warnings

General Safety Precautions

Important safety rules and warnings for operating the woodstove.

Troubleshooting Guide

Common Issues and Solutions

Lists common problems encountered with the stove and their corresponding solutions.

Maintenance

Routine Maintenance and Inspections

Covers general maintenance, thermometer, creosote, door gasket, and glass care.

Glass Replacement Procedure

Instructions for safely replacing the stove's glass.

Catalytic Combustor

Combustor Performance and Maintenance

Covers achieving light-off, monitoring, and cleaning the catalytic combustor.

Combustor Assembly Removal;Replacement

Replacing the Combustor

Step-by-step instructions for removing and installing the catalytic combustor.

Bypass Door Gasket Replacement

Replacing the Bypass Door Gasket

Procedure for replacing the gasket on the bypass door for a proper seal.

Secondary Air Tube and Door Catch

Air Tube Removal;Installation and Catch Adjustment

Instructions for secondary air tube maintenance and adjusting the door catch.

Annual Maintenance Schedule

Annual Maintenance Tasks Checklist

A checklist of maintenance tasks to be performed annually on the woodstove.

Parts List: Main Assembly

F3500 Stove Main Assembly Parts

A comprehensive list of parts for the main F3500 stove assembly with part numbers.

Parts List: Brick Layout

F3500 Stove Brick Layout

Diagram and list of firebricks for the F3500 stove.

Parts List: Door Assembly

F3500 Door Assembly Parts

A detailed list of parts specific to the door assembly of the F3500 stove.

Warranty

Limited Lifetime Warranty Coverage

Details on the component and labor coverage provided under the limited lifetime warranty.

Warranty Exclusions

Conditions Not Covered by Warranty

Lists factors and issues that void the stove's warranty, including lack of maintenance.

Warranty Limitations and Service

Obtaining Warranty Service

Instructions on how to contact the dealer or FPI for warranty service.

Product Registration and Support

Warranty Registration Process

Information on registering the product and accessing customer support and tips.

Catalytic Converter Warranty (US Customers)

Applied Ceramics Warranty Information

Details of the warranty for the catalytic converter provided by Applied Ceramics for US customers.

Catalytic Converter Warranty (Canadian Customers)

Applied Ceramics Warranty for Canadians

Specific warranty information for catalytic converters from Applied Ceramics for Canadian customers.

Regency F3500 Specifications

General

Fuel Type	Wood
EPA Certified	Yes
Weight	450 lbs
Firebox Material	Steel
Emissions	2.5 grams/hour
Heating Capacity	60, 000 BTU/hr
Maximum Log Length	20 inches
Flue Size	6 inches