REGLOPLAS RT 45 - Settings Level Factory rES Et

104
8.3 Settings Level Factory “rES Et”
The factory alignments are stored at this level; values are
also updated, e.g. after modified programming or undefined
status of RT 45.
Note: Do not switch off the unit under any circumstances
when “rES Et” appears.
After pressing the “∆” and “ ∇” keys simultaneously for 3 s,
“rES Et” will appear for 8 s.
While “rES Et” is shown, the original factory settings are
being loaded at all levels.
Upon completion, the set and actual values will be dis-
played.
P
dSP Con
rES
Et
P
∆ ∇
98
100
+
3 s