Need help?Do you have a question about the REGLOPLAS RT 45 and is the answer not in the manual?
Defines the RT 45 control system's intended use in temperature control units.
Details the operating elements and displays on the RT 45 control panel.
Instructions for powering on the RT 45 control system.
Procedures for safely switching off the RT 45 control system.
Overview of operational and status displays on the RT 45 unit.
Information on error codes and troubleshooting for RT 45 malfunctions.
Sets temperature probe limit values and flow rate parameters.
Configures various operational functions like temperature units and run-out times.
Configures alarm relay activation for different malfunction conditions.
Adjusts sensor and input/output offset values for calibration.
Adjusts individual control parameters for heating and cooling.
Defines system hardware settings, sensor types, and pump/air functions.
Configures relay functions for various operating conditions.
Programs the unit's on/off times using the integrated timer function.
Details methods for controlling and servicing the RT 45 unit.
Displays sensor types, control modes, and temperature readings.
Shows controller type, software version, and pump status.
Resets the unit to original factory settings and alignments.
Explains control algorithms like Cascade control used by the RT 45.
Describes how the unit interacts with external processors via an interface.
Information on loading factory default values for the RT 45 unit.
Pre-defined parameter sets for optimizing heating and cooling control.
Lists and describes the function of each terminal on the RT 45 unit.
Provides detailed technical specifications and operating ranges for the RT 45.
General| Brand | REGLOPLAS |
|---|---|
| Model | RT 45 |
| Category | Control Systems |
| Language | English |
To Next Page