The PCset graphic software application 43
© ERNST REINER GmbH & Co. KG Originalanleitung
5.5 Establish Bluetooth connection
To establish a Bluetooth connection, Bluetooth must be activated on the device (refer to
"Activate Bluetooth").
In the menu bar select the "File" tab and click "Search for REINER Bluetooth device".
An automatic search is started.
All devices found, as well as all devices that have already been connected to the PCset graphic,
are displayed with model and serial number.
If the jetStamp 1025 is not found, a new search run can be started with the "Search again"
button.
To establish the Bluetooth connection, select the corresponding device in the list and click
"Connect".
A pop-up menu "Connection via Bluetooth device" opens in the Windows status bar.
After a short time the jetStamp 1025 is connected to the PCset graphic.
The connected device is saved as a permanent connection so that the PCset graphic always
connects to this device as soon as it is available.
To Next Page
Loading...
Need help?
General
