Maintenance 71
© ERNST REINER GmbH & Co. KG Originalanleitung
6.4 Clean seal
Clean seal Fig. +
Place the device on a firm surface.
Press function button for print cartridge .
Print carriage moves to the right into the change position.
Lift the retaining clip of the seal upwards
Remove the seal tip from the notch.
Dab dry the seal with a soft cloth.
When inserting the seal, first insert the seal tip into the notch
and slightly press down on the retaining clip of the seal until it snaps into place in the holder.
Press function button for print cartridge .
The print carriage returns to the basic position.
Clean the seal at regular intervals. Replace if heavily soiled or damaged (refer to "Replacing
the seal").
6.5 Replacing the seal
Replacing the seal Fig. +
Different seals are required depending on the type of ink used.
- Inkjet print cartridge P5-S3-BK: use red seal
- Inkjet print cartridge P5-MP3-BK: use blue seal
To Next Page
Loading...
Need help?
General
