32
Step 10
The test result will appear after the meter counts
down from 5 to 1.
The result will be automatically stored in the
meter memory.
Step 11
Discard the used test strip safely in a
disposable container by pushing up
the test strip ejector.
If the test strip is removed after the
test result is displayed, the meter will
automatically turn off after 3 seconds.
NOTE
• The meter may switch off if the blood sample is not applied
within 2 minutes of the
symbol appearing on the screen.
• If the meter turns off, remove the test strip, reinsert and start
from step 7.
To Next Page
Loading...
