34
1. INSTRUMENT USE
USE CAUTIONS.
The observance of the cautions guarantees a high instrument accuracy and a long life of it.
Use the Dynamometer 04 only in traction, without any compression, torsion or bending.
To use properly the instrument, it has to reach the thermic equilibrium compared to the ambient of measuring.
For the load application use properly shackles or, at choice, axis of appropriate size, which allow the free setting of the
dynamometer.
Put the load to the dynamometer only after the switching - on, because the instrument has an auto-zero function at power - on .
The loads has to be applied only on the vertical axis of the instrument and work only after the right placing of the dynamometer.
After the use always put back the Dynamometer 04 in the specially provided case.
To Next Page
Loading...