EasyManua.ls Logo

Remcor DB200 - Safety Precautions; General Description; Table 1. Specifications

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 91679
SAFETY PRECAUTIONS
Always disconnect power to the dispenser before servicing or cleaning.
Never place hands inside of hopper or gate area without disconnecting power to the dispenser. Agitator rotation
occurs automatically when the dispenser is energized!
This ice dispenser has been specifically designed to provide protection against personal injury and eliminates
contamination of ice. To insure continued protection and sanitation, observe the following
ALWAYS be sure the removable lid is properly installed to prevent unautho-
rized access to the hopper interior and possible contamination of ice.
ALWAYS be sure the upper and lower front panels are securely fastened.
ALWAYS keep area around the dispenser clean of ice cubes.
CAUTION: Dispenser cannot be used with crushed or flaked ice.
Use of bagged ice which has frozen into large chunks can void warranty. The dispenser
agitator is not designed to be an ice crusher. Use of large chunks of ice which jam up
inside the hopper will cause failure of the agitator motor and damage to the hopper. If bagged ice
is used, it must be carefully and completely broken into small, cube-sized pieces before filling into
the dispenser hopper.
GENERAL DESCRIPTION
The Remcor DB series of ice dispensers solve your ice and beverage service needs in a sanitary, space sav-
ing, economical way. Designed to be manually filled with ice from any remote ice making source, these
dispensers will dispense cubes (up 1-1/4 in size), cubelets and hard-chipped or cracked ice.
B models also contain beverage faucets and must be supplied with cold product from any remote cold plate or
refrigerated soda factory.
BC units include both faucets and cold plates and are designed to be supplied direct from syrup tanks and car-
bonator, with no additional cooling required.
Table 1. Specifications
Model: DB200S DB220S DB275S
Ice Storage: 200 lbs. 220 lbs. 275 lbs.
Maximum Number of Faucets Available: N/A N/A N/A
Built-in Cold Plate: No No No
Dimension: 30W x 30D x 33H 30W x 30D x 36H 30W x 30D x 40H
Model: DB200S-B DB220S-B DB275S-B
Ice Storage: 200 lbs. 220 lbs. 275 lbs.
Maximum Number of Faucets Available: 10 10 10
Built-in Cold Plate: No No No
Dimension: 30W x 30D x 33H 30W x 30D x 36H 30W x 30D x 40H
Model: DB200S-BC DB220S-BC DB275S-BC
Ice Storage: 200 lbs. 220 lbs. 275 lbs.
Maximum Number of Faucets Available: 10 10 10
Built-in Cold Plate: Yes Yes Yes
Dimension: 30W x 30D x 33H 30W x 30D x 36H 30W x 30D x 40H
Electrical (for all models) 120V, 1ph., 5.5 Amps
Drain Connection 7/8 ID Hose