50
EN
4. Prior to fi rst use
4.1 Setting language, time and date
The menu for selecting the language (international version) or setting the time (Dutch version)
appears when you connect the iSense.
1.
Select the desired language if applicable by turning button C and then push button C to confi rm.
2. Follow the instructions on the display to select the time, year, month and day.
The controller is now ready for use. After installation, the default program is activated
(see paragraph 4.2). The temperature is now controlled by this clock program.
i
The thermostat automatically switches between summer time and winter time settings.
4.2 Default setting
Room control
The iSense is set to room control by default. This means that the fl ow temperature of the
central heating water is controlled by the temperature in the room where the iSense is installed.
Weather-compensated boiler control is also possible (with outside sensor); in other words based on
the outside temperature. The controller has a programmed heating curve which determines the water
fl ow temperature together with the outside temperature. The heating curve must be chosen so that the
least favourable room can be effi ciently heated even when the outside temperature is very low.
See paragraph 5.4 for further information about weather-compensated control.
To Next Page
Loading...
