REMEHA iSense - Page 72

72
EN
It takes too long for the tap water to get up to temperature.
- Boiler: the DHW standby function may be switched off.
In that case the symbol is shown in the display.
Control the DHW standby with the DHW standby setting
(see the installation and service manual).
- Boiler: the boiler may be heated up too late.
Set the tap water temperature using the DHW
(see the installation and service manual).
Problem
Solution
T001023-06-A
The boiler supplies no hot water or hot water only briefly.
The DHW standby function may be switched off.
Switch the DHW standby function to Continuous (see paragraph 9.2).
Problem
Solution
T001254-06-A