EasyManuals Logo

REMKO GPM Series User Manual

REMKO GPM Series
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
REMKO GPM
Safety notes
The units were subjected to
extensive material, functional and
quality inspections prior to delivery.
However, dangers can emanate
from the units if they are used
improperly or not as intended by
untrained personnel! Please observe
the following notes:
The units may only be operated
by persons that have been
instructed in the operation of
the equipment
In case of defects that endanger
the operational safety of
the unit, operation must be
discontinued
The units must be installed and
operated so that the emerging
flow of warm air does not have
harmful effects on either the
units or the surroundings
Do not expose the units to
atmospheric influences (rain,
sun, etc.)
Do no touch the units with
damp or wet body parts and/or
bare feet
Protect the units from spray
water or other liquids
Do not use gas lines for the
grounding of electrical devices
Do not touch hot parts of the
units, such as the exhaust pipe
Do not touch moving parts of
the units
Never stick foreign objects into
the units
Always observe the respective local building code and fire prevention
guidelines as well as the guidelines of the accident prevention and
insurance associations as a basic rule when using the equipment.
The units may only be mounted
on stable structures or ceilings
made of non-flammable
construction materials and with
sufficient bearing capacity.
The mounting of the units may
only be executed at the points
provided for this purpose at the
factory
The units may not be installed
or operated in potentially
flammable or explosive
environments.
The units must be installed away
from traffic zones - by crane,
for example. A safety zone with
a a clearance of 1 m must be
ensured
The protective grid of the intake
must always be kept free of dirt
and loose objects
The units may not be exposed
to direct jets of water
The units must be inspected by
a service technician at least once
annually
Safety devices may be neither
bypassed nor disabled!
Prior to maintenance or repair
work, the gas supply must be
sealed off and the equipment
must be disconnected from the
mains at all poles.
(Remove
fuse and switch off customer-
provided main/emergency
shutoff switch)
Preventative measures
with odour of gas
1. Immediately switch off the unit.
2. Close the gas shut-off devices
3. Warn all immediately
endangered persons.
4. Open windows and doors.
5. Do not activate any electrical
devices such as light switches,
bells or electrical plug connect-
ions.
6. If the room in which the gas
odour has emerged cannot be
entered, immediately contact
the fire brigade, police and the
local responsible municipal gas
supplier.
HINWEIS
Einstell- und Wartungsarbeiten
dürfen nur durch autorisiertes
Fachpersonal ausgeführt
werden.
Safety devices may not be
bypassed or disabled during
operation.
ATTENTION
The units are used exclusively
for industrial and commercial
applications. They are not
intended for the heating of
living spaces or the like.
NOTE

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the REMKO GPM Series and is the answer not in the manual?

REMKO GPM Series Specifications

General IconGeneral
BrandREMKO
ModelGPM Series
CategoryGas Heater
LanguageEnglish

Related product manuals