13
Disposing of packaging
When disposing of packaging
material, please consider our
environment.
Our units are carefully packed
and delivered in sturdy transport
packaging made from cardboard
and polystyrene.
The packaging materials are
environmentally-friendly and can
be recycled.
By recycling packaging materials,
you make a valuable contribution
to the reduction of waste and
conservation of raw materials.
Therefore, only dispose
of packaging material
at appropriate collection points.
Disposal of the old unit
The manufacturing process for
the units is subject to continuous
quality control.
Only high-grade materials are
processed, the majority of which
are recyclable.
You also contribute
to environmental protection
by ensuring that your old
equipment is only disposed of
in an environment friendly manner.
Therefore, only bring the old
unit to an authorised recycling
business or to an appropriate
collection point.
Intended use Customer service and
guarantee
As a prerequisite for any guarantee
claims to be considered, it is
essential that the ordering party
or its representative complete
and return the "certificate of
guarantee" to REMKO GmbH &
Co. KG at the time when the units
are purchased and commissioned.
The units are tested several times
to verify their correct function.
However, if malfunctions should
arise that cannot be remedied
by the operator with the assistance
of the troubleshooting section,
please contact your specialist
dealer or contractual partner.
Environmental pro-
tection and recycling
NOTE
Operation other than the types
listed in this operating manual
is prohibited.
With non-observance,
any manufacturer liability
or guarantee claims are voided.
NOTE
Adjustment and maintenance
work may only be carried out
by authorised and qualified
technicians.
The units are designed
exclusively for heating and
ventilation purposes in industrial
or commercial use (not for living
space heating in private use)
on the basis of their structural
design and equipment.
The unit definition is “commercial
drying unit” in accordance with
DIN EN 1596.
The units must only be operated
by appropriately instructed
personnel.
With non-observance
of the manufacturer's
specifications, the respective
local legal requirements or after
arbitrary alterations to the units,
the manufacturer shall not be
liable for resulting damages.
CAUTION
Copyright
Without the written
authorisation of
REMKO GmbH
& Co. KG
, redistribution,
even in part, or the use
of this documentation for
purposes other than intended
is prohibited.
!
To Next Page
Loading...
Need help?
General
