REMKO PGT Series User Manual

17
Spare parts list
No. Description EDP no.
1 Transport handle 1101142
2 Exterior cladding 1101440
2a Exterior cladding (stainless steel) 1101463
3 Combustion chamber 1101384
4 Completion panel, front 1101479
5 Protective outlet grille 1101383
6 Safety thermostat 1101197
7 Inspection cover 1101385
8 Ignition cable 1101521
9 Cyclical igniter 1101520
10 Automatic burner base 1102534
11 Automatic burner 1101526
12 Ionisation cable 1101187
14 Terminal block 4x 1101442
15 Ionisation electrode 1101186
16 Ignition electrode 1101180
17 Connection clip 1101181
18 OT elbow union 1101316
19 Gas nozzle 1101159
20 Gas supply pipe M/R 1101444
21 Gas control 1101411
22 Gas supply pipe R/D 1101453
23 Screw connection M10x1 1101409
24 GE-screw connection 1101396
25 Solenoid valve 1101376
26 Gas connection nipple 1101134
No. Description EDP no.
27 Adjusting knob, cpl. 1101192
28 Strapping plug 1101019
29 Thermostat socket 1101018
30 Operating switch 1101188
31 Strain relief 1101267
32 Mains cable with plug 1101320
33 Completion panel, rear 1101480
34 Fan motor 1108049
35 Drive clutch B 6 Ø 1108455
36 Fan blade 1101392
37 Clutch plate 1101375
38 Gas burner 1101417
39 Grommet 1101304
40 Retaining clip 1101395
xx Run-on relay (accessory) 1105075
xx Pressure controller with hose breakage protection 1101470
xx 2 linear m. Gas hose 1101419
xx 2 linear m. HP gas hose
1)
1101174
xx 5 linear m. HP gas hose
1)
1108410
xx 10 linear m. HP gas hose
1)
1108411
xx Multi-cylinder set (2-3 cylinders) 1014050
xx T-connection for multi-cylinder set 1101177
xx Nylon seal for T-connection 1101178
xx HP hose 0.4 m
2)
1101179
xx Thermostat plug 1101020
When ordering spare parts, please state the EDP no., unit number and type (see name plate)!
xx = not illustrated
1)
Version for construction site operation per DIN 4815 part 1, pressure class 30
2)
for multi-cylinder set

REMKO PGT Series Specifications

General

Brand	REMKO
Model	PGT Series
Category	Gas Heater
Language	English